Lidio Gentili, I0GEJ, vi dà il suo benvenuto nel nuovo sito RadioCronache.com!
Per questi primi giorni vi chiediamo di avere pazienza mentre stiamo mettendo a punto la transizione sul nuovo server delle pagine presenti nei due vecchi siti http://www.gentili.org/i0gej/ e http://i0gej.blogspot.com/
La Oasis of the Seas verrà varata nel 2009. La nave da crociera più grande del mondo è in costruzione presso i cantieri Aker Yards di Turku in Finlandia, costerà oltre 1 miliardo e 200 mila dollari, potrà ospitare ben 5400 persone nelle sue 2700 camere su 16 ponti. La nave disporrà di sette aree tematiche spettacolari compreso un grande parco artificiale “Central Park” che misurerà 100 metri in lunghezza e 19 in larghezza, con viali alberati e giardini con ristoranti alla moda. Il primo viaggio è stato annunciato per il Dicembre 2009.
Link: Official web Oasis of the Seas
ENG: Royal Caribbean International continues its tradition of cruise ship innovation with Oasis of the Seas, truly an architectural and nautical marvel with spectacular onboard elements and features never before seen on a cruise ship; An architectural marvel at sea, she will span 16 decks, encompass 220,000 gross registered tons (GRT), carry 5,400 guests at double occupancy, and feature 2,700 staterooms; Central Park – as natural light cascades down from the sky; When she launches is late 2009.
IC-R9500, il ricevitore professionale Icom permette una ricezione superiore entro la vasta gamma da 0.005 a 3335 MHz. L’eccezionale dinamica e le alte caratteristiche sull’intermodulazione vengono mantenute entro tutta la gamma HF con +40dBm di IP3 e 109dB di IMD a 14.100MHz (dati brochure Icom); Nelle VHF (50MHz) l’IP3 risulta +9.8dBm e a 620MHz +6.2dBm e fino a 2GHz a +5 dBm tipico.
Usa due chip DSP TMS 320C6713 serie di cui uno dedicato per una ampia gamma dinamica nello Spectrum Scope. L’indicazione panoramica può essere commutata fra larga e normale. Nella posizione normale l’escursione potrà essere predisposta fra ± 2.5 kHz e ± 5 MHz; Il ricevitore incorpora 5 filtri roofing selezionabili nei valori di selettività IF di: 3kHz, 5, 15, 50 e 240kHz;
Link: I0GEJ’s Ham radio News IC-R9500 page Link to: ZS6YI’s User review on VA7OJ web pages
ENG: Icom is proud to announce the launch of the IC-R9500, its new flagship receiver. The IC-R9500 covers from 5kHz to 3335MHz; The IC-R9500 has +40dBm IP3 and 109dB dynamic range at 14.1MHz. IP3 performance is +9.8dBm at 50MHz and +6.2dBm at 620MHz (+5dBm (typical) from 30MHz to up 2GHz). Using a dedicated DSP unit improves the dynamic range of the spectrum scope. The IC-R9500 has four different spectrum modes such as normal/wide and centre/fixed width. The normal spectrum scope covers a range from ±2.5kHz to ±5MHz, has 5 independent roofing filters (240, 50, 15, 6 and 3kHz) for improved IF selectivity.
E’ stato lanciato WonderRadio, il primo SDR (Software Defined Radio) HF+6m transceiver indiano. Questo nuovo apparato per molte parti deriva da articoli pubblicati su QEX (ARRL) da Gary. Le principali caratteristiche rese note sono: RX range: 12kHz - 60MHz / TX range: 160-6meter Power 1W PEP (500mW 6m) / IP3 +28dBm / Two Tone IMD: +99dB. Rahul VU3WJM ha dato la notizia e le news si trovano sul sito web della SDRtec.com
Linkto: SDR Technology info SDRtec.com
ENG: WonderRadio, the first Indian SDR (commercial) HF+6 meter all mode transceiver has been launched. This new rig is based on multi part QEX article: “A SDR for the Masses” by Gary Youngblood; Specifications: RX range: 12kHz - 60MHz / TX range: 160-6meter Power 1W PEP (500mW 6m) / IP3 +28dBm / Two Tone IMD: +99dB (will vary with different sound card) / Control inteface: PC Parallel Port (DB-25 connector) / Sound Card: Line In, Line Out, Spk Mic;
IC-RX7, Icom introduce un nuovo Scanner, ricevitore a larga banda, sottile e di facile utilizzo; Riceve in AM, FM narrow e FM wide, include una antenna interna in ferrite per AM ; Dispone di RF Gain, Attenuatore e VSC Voice Squelch Control ; Ampio display retro-illuminato e tastiera con comandi ad accesso rapido compreso un tasto dedicato [Search] per attivare la ricerca pre-programmata su settori di frequenza; E’ resistente alla pioggia a norme IPX4; Ha il CTCSS e DTSC decoder entrocontenuto; Un totale di 1650 memorie alpha-numeriche con possibilità di vari modi di scansione, con banchi divisi per Categorie, per Gruppi e per n° di memorie.
Link to Pre-release Information (pdf)
ENG: IC-RX7 is a Icom slim and smart wideband receiver that tunes from 150 kHz to 1300 MHz; modes: AM, FM Narrow and FM wide. It features a large, backlit LCD display. It is rain resistant to equivalent IPX4 standard. CTCSS and DTSC decode is built in. Include: RF Gain, Attenuator, Auto Power save and voice squelch control. A built-in ferrite rod antenna provides good medium wave [AM]receptionA total of 1650 memories can be classified three different ways:By Category (up to 26), By Group (up to 100), By Name - 16 character (up to 100) 18/06/2008: This device has not been approved by the FCC yet.
ENG: The software version is available on the LCD display: Hold the Mode Down button; press the Power switch to turn the transceiver On (this is possible from the update ver. 0109).
28.05.2008: There is a new firmware available at Vertex Stand/Yaesu website HD024_v0165.
You will need a serial cable RS-232C, DB9F to DB9F straight cable to connect the FT-450 transceiver to your computer. If you use the USB to serial adaptor you might need to change the COM Port. It depends on your computer. Locate the program switch thru the access hole on the bottom at the front left corner of the radio. Carefully move the switch to the right (program position). See the V/S procedure information; Ver. 0165 implements improvements: Improve KEY CLICK. Also includes all previous updates.
Link to: V/S Yaesu official Update information (Download 137KB .pdf)
Link to: I0GEJ’s Ham Radio News FT-450 page
Firmware Update on the IC-7800 Ver. 2.12; La Icom jp world support, ha rilasciato il 12.06.2008 la nuova Ver. 2.12 del Software per il transceiver IC-7800. Come si legge dalla immagine (da ingrandire) i miglioramenti interessano l’aumento delle performance del DSP Unit. Per aggiornare l’apparato leggere il manuale di istruzioni con cura, si suggerisce di inserire prima tutti i precedenti aggiornamenti rilasciati.
Utilizzare l’alimentazione con un UPS inserito, l’interrutore [ON] generale sul retro acceso, spegnere solo l’interruttore sul frontale ed evitare così che manchi tensione durante la procedura di aggiornamento.
Link to: Icom.co.jp official support web site Link to: I0GEJ’s Ham radio News IC-7800 page
ENG: Major points of update from Ver.2.11to Ver.2.12: “Improved software performance for the DSP Unit“
NEVER turn off the power from the back without shutting down the radio first (front button). These radios should be run off a UPS (Uninterruptible Power Supply); Never cut off power supply while updating firmware! Before starting the download, please read through “Section (UPDATING THE FIRMWARE)” of the IC-7800’s instruction manual.
NB: there are actually two versions of the IC-7800 manual on theirwebsite, and which version you get appears to be related to whether you usethe search facility or follow their links. The older version has a code on the bottom of the page which reads A-6328H-1EX-4-1. What I assume to be the newer version has the code A-6328H-1EX-8-1, but unfortunately it is still dated 16/10/2007.
Ritornano i Kit per assemblare apparati radio come ai vecchi tempi. La Marconi Japan Co, Ltd ha presentato alla Expo di Dayton Hamvention 2008 un Ricevitore HF RX-1 e un Trasmettitore HF in Cw TX-1, realizzati anche con pannelli di vario colore: Bianco, Grigio, Rosa! Saranno disponibili in Kit con soluzioni tecniche di preparazione che renderanno facile il montaggio, per divertirsi ad autocostruirli.
Link: Official Site Marconi Japan Co Ltd
Link: Dayton Hamvention Expo Galleries images
ENG: HF Receiver ”Marconi RX1“ and HF CW Transmitter “Marconi TX1“ will be exhibited in Dayton Hamvention on May 16-18, 2008; the MARCONI company, have developed and finally brought up a unit in a style of “KIT FORM” in order to solve all these troblesome: Ready-made necessary holes provided in the casing; Panel pre-imprinted; Provided with dial structute; Provided with all parts necessary. This KIT unit from MARCONI is highly recommended to let you fully enjoy for fabrication of your own radio.All what is needed to be done is to work on the pattern of your circuitry and assemble. As the case itself is design with enough spacing, new features can be added at each time its need arises. And, as the circuitry can be changed and improved the way it is wanted,there is a grand pride of being a ownerships of a unit that nobody-else has the same of its kind in the world.

RadCom reviews: IC-7700. Queste le conclusioni di Peter Hart, G3SJX che ha curato la recenzione per la RSGB, in merito all’analisi dell’Icom IC-7700:
“The IC-7700 is without doubt a most impressive radio. Its performance, its features and its ergonomics place it high in the top league. As a general purpose and contest radio it is excellent, but for serious DXing with split frequency operation the lack of a second channel receive capability or dual-watch is a major shortcoming, particularly with a price tag around 4,000 UK Pounds. It all depends where your interests lie as to which features are most important”.
Link to: Radcom RSGB (Radio Society of Great Britain) Home Page
La NASA con il progetto LRO consente a tutte le persone di unirsi idealmente alla missione lunare di esplorazione e con l’occasione di poter inviare i propri nomi sulla Luna a bordo dell’Orbiter Lunare di Reconnaissance. Questa operazione che consente di trasmettere il nome alla luna, è frutto di uno sforzo di collaborazione fra la NASA, the Planetary Society in Pasadena, California, e the Johns Hopkins Applied Physics Laboratory. I nomi verranno scritti in un microchip integrato nella navetta spaziale. I partecipanti possono aderire all’avventura lunare presentando i propri dati tramite il link qui sotto, scaricare e stampare un certificato pdf di partecipazione col proprio nome, entro il 27 giugno 2008.
Link: Send Your Name to the Moon Aboard LRO
ENG: The Send Your Name to the Moon, Web site enables everyone to participate in the lunar adventure and place their names in orbit around the moon for years to come. Participants can submit their information at Link, print a certificate and have their name entered into a database. The database will be placed on a microchip that will be integrated onto the spacecraft. The deadline for submitting names is June 27, 2008.