IC-7600 User Manual in English is released. Here now at least you can read the new features summary

User Manual in English version for the IC-7600 is released by Icom Inc. Jp.
Here now at least you can read the new features summary by www.radiocronache.com® —- (See the Link below for download User Manual)

Built-in a high-quality DSP-based Baudot RTTY modulator /demodulator and direct PC keyboard connection capability for RTTY and PSK operations without a PC. RTTY operation can be performed without an external RTTY terminal, TNC or PC. Pre-set characters can be sent using the RTTY memory. The contents of the RTTY memory/received signal can be saved into the USB-Memory. Two data formats, Text and HTML, are available for PC data storage.
Built-in a high-quality DSP-based PSK encoder /decoder is built-in to the IC-7600. When connecting a PC keyboard, BPSK (Binary Phase Shift Keying) and QPSK (Quadrature Phase Shift Keying) modes are available for PSK. The transmission contents can be typed before being transmitted. The contents of the PSK memory/received signal canbe saved into the USB-Memory.
[Note]: When a PC keyboard is connected to [USB] connector on the front panel, the RTTY/PSK/CW memory contentst nad the file name can also be edited from the keyboard. In this case, a USB hub is required.

Twin PBT® operation: in SSB/CW/RTTY/PSK/AM the PBT (Passband Tuning) electronically narrows the IF passband width by shifting the IF frequency slightly outside of the IF filter passband to reject interference. The IC-7600 uses DSP for the PBT function. Moving both [TWIN-PBT] controls to the same position shifts the IF both above and below the received frequency.
DSP filter shape (Soft/Sharp): The type of DSP filter shape for each SSB, SSBD (data) and CW can be selected independently from soft and sharp. IC-7600 DSP use the TMS320C6726BRFP at 266MHz.
Roofing filter selection: The IC-7600 has 3, 6 and 15 kHz roofing filters at the 1st IF frequency. The roofing filter provides interference reduction from nearby strong signals.

Large LCD with LED backlight multi-function Display. High resolution spectrum scope screen, several times to select the scope span: ±2.5, ±5.0, ±10, ±25, ±50, ±100 and ±250 kHz are available. This DSP-based spectrum scope allows you to display the frequency and relative signal strength  of received signals on the strengths of signals. The IC- 7600 has two modes for the spectrum display – one is center mode, and the other is fixed mode. In addition, the IC-7600 has a mini scope screen to save screen space.

Dualwatch operation. Dualwatch monitors 2 frequencies with the same mode simultaneously. During dualwatch, both frequencies should be on the same band, because the bandpass filter in the RF circuit is selected for the main readout frequency.

Push [MAIN/SUB] to enables the sub band access when changing the frequency to Main dial, etc. in sub band.
Adjust the [BAL] control to set a suitable audio signal strength balance between the main and sub readout frequencies. S-meter shows the combined signal strength. The dualwatch function is convenient for tuning the transmit frequency while monitoring both frequencies used for transmitting and receiving. Split frequency operation allows you to transmit and receive in the same mode on two different frequencies, on the main and sub readouts.

USB Rear connector. [USB] (Universal Serial Bus – B type) Connect a USB cable to be used for the modulation input, the transceiver operation with PC, the received audio and the decoded character import to the PC. Icom HP (http://www.icom.co.jp/world/support/index.html) gives the USB driver and the installation guide download service.
Sets the input modulation level of the [USB] connector from 0% to 100%  in 1% steps on the Level set mode. The received audio output level from [USB], cannot be adjusted with the [AF] control.

Link to: Download Icom Inc. Jp  User Manual English .pdf (14.87MB)

[Note] :
Please see te Icom official documents and data for more detail and totals feature
Icom, Icom Inc. are registered trademarks of Icom Incorporated  (Jp)

VK9LA DXpedition Lord Howe Island, Mar 23rd – Apr 3rd 2009 IOTA OC004. See the Link News and Propagation maps

VK9LA DXpedition Lord Howe Island, IOTA OC004 – Mar 23rd – Apr 3rd 2009

See the Link info, utility and news below

Tony IZ3ESV, San K5YY, Bob N2OO, Lance N2OZ, Stan SQ8X, Peter SQ9DIE, Victoria SV2KBS, Tex VK1TX, Luke VK3HJ, Chris VK3QB, John VK4IO, Catherine VK4VCH, Chris VK5CP, Jay W5SL, John VK5PO & Bill VK4FW will be active on all bands 160m – 6m on SSB, CW and RTTY including the CQ WPX SSB Contest. See the Propagation maps created with HamCAP
—————————– IT:
La DXpedition da Lord Howe Island VK9LA sarà attiva dal 23 marzo al 3 aprile in tutte le bande da 160m a 6m in SSB, CW e RTTY, incluso il CQ WPX SSB Contest .

Qui sotto trovate anche il Link per scaricare Ham CAP il free software by VE3NEA per la previsione della propagazione. Da notare che IZ3ESV Tony, socio del COTA, fa parte del Team VK9LA  -  Link per le Notzie, Attività, Pilot N1DG, frequenze e per la mappa di propagazione HF by Hamradioweb  realizzata con HamCAP, free software che si può scaricare ed installare nel proprio PC.

Link to: Oceania Amateur Radio DX Group Inc. VK9LA web page
Link to: Lord Howe Island propagation forecast – by Hamradioweb
Link to: Download Ham CAP HF prop. prediction tool by VE3NEA

QST March, 09: Icom America Inc. introduced the IC-7600 advertising. Your Price $3999.95 in the US

———————————————————————————————–
QST March 2009: IC-7600 advertising. Your favorite DX. Bottle not required.

In the US: List Price: $4876.00 – Your Price: $3999.95;  Expected delivery late April 09. In the Europe: Ian Lockyer, Marketing manager of Icom UK said, it is expected that the IC-7600 will be in stock by the end of March, 09. Pricing is still to be confirmed. (TBA)
Linkto:  Some thoughts on the IC-7600 page by radiocronache

Note: Once the new Yaesu PEP upgrades for the FT-2000 have their effect then ICOM could well face some competition?? – Also, I wouldn’t be surprised to see the 7600 priced at a discount at Dayton Hamvention May, 2009!

The IC-7600 received FCC certification on February 9, 2009 ID:AFJ307300
Icom Europe GmbH – Declaration of Conformiy 1999/5/EC 23rd Jan. 2009