// contenuti per data

Archivio mese
04/2009

IC-7200 Product Review from June 2009 QST by © ARRL. Recenzione completa QST di Giugno 2009

27/04/2009

QST-reviewIC-7200 HF 6m Review from June 2009 QST

Product Review from QST magazine. Reviewed by Steve Sant Andrea, AG1YK ARRL Assistant Editor
——Clik to enlarger ————————————
ENG: Some data drawn from ARRL product reviews are summarized in the table on image. These reviews are worth reading in their entirety, so as to obtain a systematic comparison between the most recent rigs entry-levl or portable type : IC-7200, IC-7000, FT-950 e FT-450.

Source QST 06/2009“Bottom Line”
The IC-7200 is a compact, easytooperate HF and 6 meter transceiver that offers many features for voice, CW and  digital mode operating. Rugged, water-resistant packaging makes it attractive for portable and emergency stations

IC-7200 recenzione completa su QST di Giugno 2009 della ARRL. Sulla rivista QST di Giugno è riportata una ampia recenzione del recente  IC-7200 HF 50MHz 100W Transceiver della Icom. L’apparato è stato recensito da Steve Sant Ander, AG1YK ARRL Assistant Editor. Nella Tabelllina riportata nell’immagine, qui sopra, sono indicati sommariamente solo alcuni dati, tratti dal “Key Summary” di QST per gli apparati IC-7200, IC-7000, FT-950 e FT-450 più o meno classificabili nella classe entry-levl o portatili.  Certamente le recenzioni tecniche meritano di essere  lette per intero sui vari numeri del QST Magazine per un confronto completo e sistematico di tutte le performance  degli apparati stessi.
Link to:   ARRL Home-Page – www.arrl.org

[Note]: ARRL Members Only can now download the June, 2009 QST Product Review.



IC-E80 ID-E880 & IC-80AD ID-880H D-STAR® easy setting. Download CS-80/880, Broshure Eng. Link to the features. The easy Key

20/04/2009

ID-880H/ID-E880

———————————————————————————————

New IC-E80 and ID-E880 V/U Duo Band, enjoy D-STAR®. Are two new entry-level models of D-STAR® that achieves easy setting 144/430 MHz  transceiver. See note below “New easy Key Controls” (Due nuovi apparati  D-STAR, guarda qui sotto i nuovi tasti di controllo più funzionali!)
Switchable VHF/UHF dual bander:
The ID-880H provides VHF/UFH dual band capabilities (one band at a time) via a simple band switching system.
Price list (up news 03 May, 2009):
Source: Marcucci Spa Official Importer. Prezzi di listino IC-E80 €456,50 + IVA 20%  ID-E880 €539,00 +IVA
Price list:
Source: Icom Inc. Jp: ID-80 Yen 52,290; ID-880/D (50W type)  Yen 62,790 ( each including  jp. tax) – (Price list other models  ID-92 Yen 62.790; IC-2820 Yen 94.290 Inc jp. tax!)

Link to: ID-880H VHF and UHF Digital Transceiver data  features
Link to: IC-80AD VHF/UHF Dual Band handheld data features
Link to: Download IC-80AD/ID-880H  Broshure, English lang (2.08MB pdf)
Link to: Free download CS/880 cloning software from the Icom Inc. Jp

———————————————————————————————
ID-E880-easycontr
———————————————————————————————
ID-880H & ID-E880 New easy Key Controls (ID-E880 Nuovi tasti di controllo facilitati)
D.STAR REPEATER. Your KEY [DR-UR]
Push to selects DR mode:
.Rotate [DIAL] selectes access repeater
.DV mode is automatically selected

During DV mode operation, push and hold for 1 sec. to enter your call sign selectio state:
.Rotating [DIAL] selects your call sign
.DV mode is automatically selected

IC-E80-easycontrIC-E80 new volume control key and new easy key Controls
[DR-UR] …….. idem ID-E880

New [VOLUME CONTROL KEY]
-Adjust audio volume level
-Enter or send the DTMF code “D”

The IC-E91 IC-E92 function of Tuning control and Volume control can be traded !
[IT]: Le funzioni di controllo in asse  Sintonia / Volume sono state così sostituite, evitando così l’impropria variazioni del Volume durante l’azione del Tuning!!

——————————————————————————————
Download
the Broshure English lang. and more info to the Link below!


Icom ID-80

[IT]: Qesti nuovi modelli “entry-level” per  D-STAR®, che consentono una più facile impostazione del transceiver 144/430 (duobanda!)

Sono siglati con IC-E80 & ID-E880 (per CE) e distribuiti in Italia da Marcucci Spa .
Con l’opzione Mic HM-189GPS o con un GPS commerciale da collegare, consente lo scambio  di informazioni di posizione  come il D-PRS® oltre al DV (digitale) con interessanti improvement operativi sui comandi semplificati.
[News]: Icom Inc.Jp  ha rilasciato un software per il PC che permette la scrittura e clonazione dei dati in memoria, compresa l’importazione del “Repeater list”  con tutti i dati operativi.
[NB]: Vedere le informazioni Icom CS-80/880 help file! è il Link sopra per il free download)

Link to: Download IC-80AD/ID-880H  Broshure, English lang. – (Broshure En 2.08 MB PDF)

[News]: Cloning  Software CS-80/880 for the PC – designed by Icom Inc.
This cloning software is designed to perform data setting and cloning for the ID-80 or ID-880 series transceivers. Repeater list importation: Write the data, including repeater information, to the transceiver from the cloning software. [Note]: Please refer to the Icom CS-80/880 help file of the cloning software for help with the function or setting meaning, See the Link above!
[Note]: Either OPC-1529R, OPC-478 or OPC-478UC optional cable is required!

[Note]: More features….  see the official Icom Inc. Broshure and data. – Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Inc. (Japan)



PSK31 Digital mode MixW IC-7700 – IW0SAF Moreno, ARI Perugia a member of the PropNET PSK project. !!Updated

14/04/2009

Clik to enlarge!!

—-new.photo—————————————————————————
PropNET PSK network. IW0SAF, Moreno Momi  ARI Perugia, captured by a member of the PropNET project! – See the Link below
IW0SAF, Moreno  è attivo in HF e non solo, opera anche nei modi digitali come è il PSK31 nel suo eccellente Shack, dotato di ottimi apparati ed accessori. Qui si nota il suo recente IC-7700 molto adatto e performante anche nelle comunicazioni Digitali RTTY e PSK31 con e senza computer
IC-7700-psk31

—-new.photo—————————————————————————-
[IT]
Nell’IC-7700 il modulatore e demodulatore Boudot RTTY e PSK31 (Ecoder/ Decoder basati sul DSP) sono entrocontenuti, ed è capace di operare in RTTY e PSK31 con il collegamento diretto di una Tastiera (alla porta USB) senza la necessità di utilizzare un Computer esterno.
Collegando, invece, ad un Personal Compuer con tastiera, le operazioni in RTTY e in PSK31 ed altri modi digitali possono essere anche eseguite con  un apposito  software esterno,  installato nel Computer. Nel caso è il MixW multimode software (V2.18). I collegamenti trà PC e RTX  di Moreno avvengono tramite l’interfaccia “microHAM USB Interface II ™”

[EN]
Baudot RTTY and PSK31 modulator/demodulator (DSP-based encoder/ decoder) is builtin to the IC-7700 and direct keyboard connection capability (port-USB) for RTTY and PSK31 operations without a Personal Computer. Connecting a Personal Compuer and keyboard, RTTY and PSK31 operation can be performed with MixW multimode software installed and “microHAM USB Interface II™” connected from PC and RTX.
iw0saf-ic-7700 iw0saf-antenne propnet-screen

IW0SAF, 13.03.2009 received this Mail by KF6XA:
Dear Moreno,
Recently a PSK31 CQ transmission of yours was automatically captured by a member of the PropNET project.

PropNET is a system for analyzing and recording HF and VHF circuit quality.
It uses a distributed network of PSK31 stations automatically transmitting and receiving messages and reporting them to a central database, where real-time displays and statistical analyses are generated. We’re interested in real-time propagation detection and long-term analysis of circuit usability, and other interesting uses that the combination of radio and computers can facilitate. You’re obviously interested in digital modes and computers … please………
73 de Dave KF6XA (data-whacker and webmaster)

Link to: The Internet Portal to the PropNET Project
Link to: PropNET Communication Circuit Quality and Events Reported

[Nota]: IT – Per la partecipazione al progetto PropNET è richiesto l’utilizzo di un software (PropNETPSK – Relesase:  3.3.0.7 Update: January 26, 2009) Scaricare liberamente sia  il software sia la User-Guide sul sito web ufficiale di cui ai link qui sopra.
PropNET PSK analizza e registra in HF e VHF la qualità della popagazione in tempo reale con report e displays via internet dei segnali PSK . Lo scopo principale del progetto PropNET è sviluppare un sistema avvanzato  dedicato al Servizio Automatico di Controllo nell’area Digitale. PropNET ha un codice PHG che è in realtà una stringa PHGDRA/code (include nell’ordine: Potenza, Altezza, Gain, Directivity, Rate, Altezza).
In pratica, PropNET opera in modo molto simile ad APRS (http://www.aprs.net).  Come l’APRS le stazioni PropNET formano una rete per la condivisione delle informazioni, proprio come in una tavola rotonda in SSB. Ciò significa che le norme che disciplinano PropNET possono essenzialmente  essere le stesse di quelle che disciplinano l’APRS nei vari paesi.



IC-7600 Review: User Evalutation & Test Report by Adam VA7OJ/AB4OJ. – I could not find any fault with the Transceiver

03/04/2009

New IC-7600

———————————————————————————————
IC-7600 Review by VA7OJ : Download the fine User Evalutation & Test Report (PDF format) with the Link below or clik on the Banner  below -
I could not find any fault with the Transceiver IC-7600.  This radio promises to be a worthy replacement for the tried and proven IC-756Pro3! – Many Thanks Adam, by www.radiocronache.com.

Clarification: The test on pag. 8, par. 2) of this report is for Reciprocal Mixing Noise, not IMD dynamic range – Precisazione: La prova a pag. 8, par.2) della  relazione riguarda la reciproca miscelazione con il rumore di fase del LO, non sono valori della gamma dinamica IMD.

Questo eccellente rapporto, realizzato da VA7OJ/AB4OJ, Adam, descrive dettagliatamente  la valutazione del nuovo IC-7600 S/N #0201203 dal punto di vista dell’utente. Poi sull’Appendice 1) vengono riportati, con molti dettagli tecnici, misure strumentali e diagrammi, molti risultati dei test principali eseguiti sul transceiver nel proprio laboratorio RF. Adam ha potuto utilizzare, per un certo numero di giorni, l’IC-7600  nel suo shack, quindi ha avuto l’opportunità di usare la radio e valutarne le principali caratteristiche  compreso il comportamento in aria – Adam ha testato il livello di uscita RX Baseband dalla porta USB utilizzando DM780*, con  l’interfaccia di Ham Radio Deluxe (* HRD by HB9DRV),  l’IC-7600 ha mostrato subito nel computer l’indicazione “USB Audio Codec” e HRD ha cominciato a lavorare.

Al par. 20) Conclusioni, di questa ampia relazione, Adam scrive: “”Dopo alcuni giorni trascorsi piacevolmente nella “cabina di pilotaggio” dell’IC-7600, sono molto favorevolmente impressionato dalla sua solida e raffinata struttura, dall’attraente e informativo display, dal facile approccio operativo molto intuitivo,  dall’impressionante serie di eccellenti funzioni e per le prestazioni in-aria. Questa radio offre la maggior parte delle funzionalità e delle prestazioni dell’IC-7700 però con le dimensioni simili ad un Pro3. L’apparato si pone in una classe di prezzo  che è tra il Pro3 e l’IC-7700. Icom com un suo colpo vincente ha abilmente introdotto una  nuova interfaccia USB per il computer”" -

In effetti la porta USB è innovativa, non trasporta solo i dati  standard CI-V, ma comprende anche i segnali  audio TX e RX in “PCM baseband”  tra il computer e l’IC-7600. [Nota]: Icom Inc. ha già rilasciato il software  USB Drive Vers.1.00, da installare nel computer. Vedi sotto il Link
———————————————————————————————Download this Review

———————————————————————————————
Link to: Download the IC-7600 User Evalutatio & Test Report  by Adam, VA7OJ

EN: This fine report, by VA7OJ, Adam describes the evaluation of the new IC-7600 S/N #0201203 from a user perspective.  Appendix 1 presents results of RF lab test suite performed on the radio, detailed measurements and diagrams. Adam was able to spend a number of days with the IC-7600 in your ham-shack, and thus had the opportunity to exercise the radio’s principal features and evaluate its on-air behavior – Adam thested the RX baseband output levels at the USB port using DM780*, interfacing with Ham Radio Deluxe (*HRD by HB9DRV), the IC-7600 showed up in the computer as “USB Audio Codec”, HRD started working

va7oj's-shackOn this report, par. 20) Conclusion, Adam writes: “”After several days’ worth of “cockpit time” on the IC-7600, Adam .. very favorably impressed by its solid, refined construction, attractive and informative display, easy familiarization experience, smooth operating “feel”, impressive array of features and excellent on-air performance. This radio offers most of the functionality and performance of the IC-7700 in a Pro3-size package, and in a price class between the Pro3 and the IC-7700. Icom have again scored a coup with the straightforward USB computer interface”"  -
Indeed the USB port trasports non only CI-V data, but also TX and RX PCM baseband between the IC-7600 and the computer. [Note] Icom Inc. Software USB Drive Vers.1.00 is necessary. Free download Vers.1.00  and read the manual  from Icom Inc. official  web

Link to: Icom Inc. Jp – USB Driver(Ver.1.00), Driver Utility and manuals.
Link to: Radiolab – An excellent tutorial on reciprocal mixing -
Link to: Download the IC-7600 User Evalutatio & Test Report  by Adam, VA7OJ

Appendix 1) summary:

Performance Test on IC-7600 – As performed in Adam Home RF lab, March 17 – 23, 2009 -
Receiver Test: 1) MDS (Minimum Discernible Signal) ATT off, NR off, NB off. Levels in dBm at 3.6 – 14.1 – 50.1 MHz Pream of, 1 and 2, SSB 2.4kHz bw and CW 500Hz bw, 1a): AM Sensityvity (wide 9kHz filter) – 2) Reciprocal Mixing Noise – 3) IF filter shape factor (-6/-60 dB) – 4) SSB filter roll-off in dB and diagram Sharp/Soft – 5) NR noise reduction, measured as SINAD – 6) Manual Notch Filter (MNF) stopband attenuation and banwidth diagram Wide, Mid, Narrow setting – 7) AGC imput response, a) RF burst, b) Test with pulse trains – 8) Noise blanker (NB) impulse response – 9) S-meter tracking & AGC threshold, 9a) attenuator tracking – 10) In-Band IMD test -52 dB! – Follow par. 11) 11a) 11b) 12) for Spectrum Scope Tests and 13) to 22) for Trasmitter Tests.



FTdx-9000 PEP Updated now: EDSP V11.50 CPU V05.13 – PEP for UK /EU, Italy ICAL – Updated now PEP-2000 DSP V1150 Cpu V0146

02/04/2009

PEP-9000-up-details
FTdx-9000 PEP (aka Mark 2)
Updated now  04/02/2009 (02 April, 2009) the idem EDSP Software V.11.50 and new Main CPU firmware V.05.13……(source Vertex Standard USA, Inc.)

PEP Europa.!  Yaesu UK Ltd announce that the FTDX9000 PEP Upgrade program:  UK and EIRE owners in January 26th 2009. European owners after the UK program has been completed…….. source Yesu Uk Ltd.

Link to: Yesu UK Ltd annunce the PEP program and instructions

PEP Italy! ICAL SpA importatrice ufficiale per l’Italia dei prodotti YAESU/ VERTEX  STANDARD annuncia l’inizio del programma di aggiornamento PEP-9000 dedicato ad apparati serie FTDX-9000, in Centri Assistenza Italiani.
Il programma in oggetto sarà disponibile per i soli apparati distribuiti da ICAL S.p.A – Milano…… source Ical Spa It.

Link to: ICAL Spa – Official importer Yaesu V/S for Italy

———————

FTdx-9000 PEP – HF 50MHz Transceiver (Cosidetta (aka) Versione Mark 2)
A partire dal 20 novembre 2008, la V/S Yasu USA ha rilasciato il  programma PEP-9000 per la valorizzazione dei suoi apparati FTdx-9000 series.  Il servizio di aggiornamento compresi i racambi, per gli utenti americani,  è tutto a spese di Vertex Standard fino al 31 Dic. 2009 –  Ciò include un nuovo firmware ed una consistente sostituzione/modifica di molte Boards: CNTL-UNIT, TX-UNIT, DSP-UNIT, SCP-UNIT, RX-1-UNIT, RX-2-UNIT (per i Mod D/MP) ed anche il Power Meter che nel nuovo ha scala W output  in log. per migliori indicazioni.

Da fine Gennaio 09  la procedura per la sostituzione delle varie Boards,  per implementare  il PEP  program, inizia anche per gli  Utenti Europei nel centro di assistenza costituito presso la  Yesu UK Ltd – (non più in Olanda!) (per clienti ICAL Spa Italy vedi Link più sopra)

Yesu scrive  su QST: “The Best of the Best Just Got Better”  (… Si potrebbe anche dire  così: …. Never ending story ??… To be continued ..11.24..29..39..45..50..0513)!

————————– Nota 1-it) FT-2000
Dal 1° Gen 2009, Vertex Standard ha introdotto anche il programma    PEP-2000 per il Tranceiver FT-2000/2000D, qui si tratta di miglioramenti tramite il solo  sviluppo del software per il Main Cpu e per il DSP.   Come per il PEP-9000 anche qui gli sviluppatori V/S rilasciano continue versioni per ottenere una stabilizzazione funzionale  del transceiver – Sul sito web  Yaesu US  il Firmware è arrivato a: ..Main Cpu Ver. 0146 EDSP idem Ver. 11.50 del 02/04/2009 (02 April,2009).
( anche qui una Storia infinita??  …. To be continued….11.29..39..45..50..0144..0146)

—————————- FTdx-9000
Nota 2-it)
Si conferma che  questa procedura di aggiornamento con un’altra Ver. CPU 0513 del 02.04.2009  (02 April, 2009) può essere utilizzata alle seguenti condizioni:
• Deve esserci il logo PEP9000 attaccato al di sotto dell’etichetta del Numero di Serie. (Apparati già ristrutturati con le nuove schede o di nuova produzione con Ver.PEP!!)

bottom-vista1
ENG: After 20 Nov, 2008, Yaesu USA released its PEP-9000 enhance ment program for all FTdx-9000 radios.

This includes new firmware and replacement /modification of many many Boards: CNTL-UNIT, TX-UNIT, DSP-UNIT, SCP-UNIT, RX-1-UNIT, RX-2-UNIT (D/MP version), Power Meters, with new ones that have the log scale on them to permit easier reading between 0 to 100 watts.  Vertex Standard will provide all parts and labor for the Enhancements at our expense. The radio updated with PEP9000 already provided many improvements.
The Yaesu writhe an QST: “The Best of the Best Just Got Better” – (..…Never ending story….. To be continued ….. V11.24..11.29..11.39..11.45.. 11.50..0513)!
——————————————————-

————————— Note 1 – FT-2000

From the 1st Jan, 2009 is started the PEP-2000 Version  from the FT-2000 /2000D, the whole radio can be redefined only by software!…. Firmware now available on Yesu US website is Main Cpu Ver. 0146 and  EDSP idem Ver. 11.50, up: 04/02/09 (02 April, 2009)- (….To be continued….. V11.29.. 39.. 45.. 50..0144..0146!!)

————————— FTdx-9000
Link to:  FTdx-9000  Update V11.50 – V05.13 Information (04/2/09) PDF

Note 2) - This procedure is only needed under the below conditions:
• Must have the PEP9000 logo sticker on the radio below the serial number label.
– While holding the [GEN]+[50]+[ENT] turn the radio ON, the Version is displayed in the 7 digits VFO A for 5 seconds.

————————— Up: 04/2/2009 (02 April, 2009)

Ver. 05.13 (MAIN CPU) implements improvements (also includes all previous updates):
• Correct the PC keying • Change the adjustment characteristic of the TX power control. (After installing V0513, you should verify your TX power level settings).
NOTE:
The level indication requires a quicker knob rotation to activate, before making fine adjustments. A slow knob rotation may not activate the display
Ver. 11.50 (EDSP) implements improvements (also includes all previous updates):  • Corrects a low audio problem found in Ver. 11.45 • Corrects the CW-DET indication problem found in Ver. 11.45
Note 3) – The software updates will work with PEP9000 all versions (AF, AS, EU, NA, OC, SA or all Countries) of the FTdx9000Contest, FTdx9000D and FTdx9000MP
Note 4) - For uploading new EDSP Software using the RS-232C, DB9F to DB9F straight cable (CT-119 only for Main CPU)

Note 4) - See the V/S Yaesu official documents for more detail instructions!!



Traduzione / Translate

Statistiche


53,744
Unique
Visitors
Powered By Google Analytics

AD