Flex-Radio Systems will introduce their newest FLEX-6500 & FLEX-6700 HF/50MHz Transceivers and FLEX-6700R HF/VHF Receiver with SmartSDR™ Grafical Interface! On display now at Dayton Hamvention 2012. – See the preliminary preices and brochure link below!
The FLEX-6000 Signature Series was designed with plug-and-play installation as a requirement. There are no drivers or interface cards to install. – Just plug the radio into an antenna, power supply and network, load the SmartSDR™ software on your existing PC and operate. – Preliminary List Prices: mod. Flex-6700: USD 6999,00/ mod 6700/R – USD 5999,00/ mod 6500 – USD 3999,00 — (Official Prices: TBA!!)
The FLEX-6700 transceiver and FLEX-6700R receiver each allow creation of up to 8 independent Slice Receivers from 0.03 MHz to 77 MHz and 135 MHz to 165 MHz.
The FLEX-6500 allows creation of up to 4 Slice Receivers with tuning from 0.03 MHz to 77 MHz. – Each Slice Receiver can provide independent spectral display of up to 384 kHz. - Each FLEX-6000 Signature Series radio is equipped with a 1Gbps Ethernet port and two USB 2.0 ports for communication to existing PCs or other future display platform!
The Xilinx® Virtex®-6 FPGA works in tandem with a Texas Instruments™ DaVinci™ Digital Media Processor that includes a 1.4 GHz (1.2 GHz on FLEX-6500) ARM Cortex™-A8 CPU with NEON™ floating point coprocessor. It also includes a 1.2 GHz (1.0 GHz on FLEX-6500), 32-bit floating point DSP coprocessor. The FLEX-6000 Signature Series achieves world class PNDR (Phase Noise Dynamic Range) through the incorporation of an ultra-low phase noise master oscillator at 983.04 MHz,
The FLEX-6500 and FLEX-6700 incorporate a 100W push-pull pair of rugged RD100HHF1 MOSFET transistors operating at 13.8V DC - Mod system: Digital Low Power at Carrier Frequency
Link to: WoodBoxRadio for the FLEX-6000 Series official Brochure in PDF