YAESU FTDX-3000 HF/50MHz – 4.3″ LCD DR 106dB IP3 +33dBm 2kHz Spacing (July “QST” Cover II)

FTDX-3000 HF+50 MHz Transceiver coming-soon, the back cover of QST showed an advertisement for the latest addition to the Yaesu family! The July QST Cover II inserts the manufacturer’s specifications: !! 4.3-inch Large color LCD display / DR:106 dB / IP3 +33 dBm  / 14MHz Band CW (500) (IPO ON, Roofing Filter 600Hz, 2 kHz Spacing)
(IT) FTDX-3000 HF/50MHz i prezzi e la disponibilità saranno annunciati presto! La II^ di copertina di QST ha la pubblicità con questi dati: Display LCD da 4.3″ e non 3.5″ più le specifiche DR, IP3 come sopra:

!! 八重洲無線（株） 新型HF/50MHz帯オールモードトランシーバ「FT DX 3000」

As you can see the buttons VFO B/A  are reversed!  than usual A/B -
The Main operating frequency is the most important in the radio display, with [VFO-A] frequency located just above the Main dial. The [VFO-B] frequency can be displayed on the 4.3-inch color LCD display (left).
For the [MODE] change (USB LSB CW etc.). you have a single button with sequential selection or via Memory channels! – (like [MODE] setting of the new Elecraft KX3 Transceiver)

The Down conversion 9 MHz 1st IF frequency receiver construction, can realize narrow 300 Hz (optional), 600 Hz and 3 kHz bandwidth Roofing filters. - Yaesu implements new three dedicated (XF-127 series) sharp Crystal Roofing Filters for a superior close-in dynamic range.

Yaesu Musen Co., LTD says: The FTDX3000 has the high dynamic range IP3 performance that was realized and proven in the FTDX5000. – IF DSP  with 32 bit high speed floating decimal (max 2800 MIPS)

The FTDX-3000 Transceiver displayed at the 2012 Dayton Hamvention and at 2012 HAM RADIO Friedrichshafen! -

Selectivity (WIDTH: Center) at -6 dB -60 dB CW/RTTY/PKT 0.5 kHz or better 750 Hz or less - SSB 2.4 kHz or better 3.6 kHz or less/ AM 6 kHz 15 kHz/FM 15 kHz or 25 kHz - Image Rejection: 70 dB or better (1.8 MHz – 30MHz Amateur bands) - Transmitter Output:  5 – 100 watts (2 – 25 W AM carrier)

FTdx-3000 a high speed Spectrum Scope LCD Display 4.3-inch (480×272 dots) – (like the larger 5.8-inch of the  IC-7600) -

When in the Auto Mode, the Spectrum Scope display is updated in real time. The maximum bandwidth of the scope is 1 MHz, and the minimum span width setting is 20 kHz.
Built-In specialised receiver amplifier for 50 MHZ; Signal output for an external receiver;  9 MHz IF output;  USB Interface and

The color LCD displays the operating information and the status of the transceiver functions.
Although the FTDX3000 has only one receiver, a high speed Spectrum Scope is built into the radio.  (…click to enlarg !)
AF Scope display and RTTY/PSK encoder/decoder (optional)

Link to:  Download the FTdx-3000 Preliminary Brochure link a Yesu UK
Link to: Universal radio Inc – FTdx-3000 Preliminary Specifications

FT-101E Built by, the Yaesu Co., Japan during the 1970′s – 1980′s was one of the Yaesu family of fine Amateur Radios! -
The FT DX 3000 Transceiver is the latest addition to the Yaesu family, incorporating the newest Down conversion and Sharp edged crystal roofing filter technology. - These features provide outstanding receiver performance which is a heritage of the FT-DX5000.

[Note] All marks are property of their respective owners. Specifications are subject to change without notice!

• Tweet
• Pin It

Tutti i contenuti di radiocronache.com sono pubblicati da I0GEJ sotto
licenza Creative Commons BY-NC-ND 2.5, salvo diversa indicazione.
L'attribuzione da riportare è: " Tratto da www.radiocronache.com "