Archivi categoria: IC-R8600

Icom new release of the broadband IC-R 8600 – 10kHz-3GHzの広帯域 (新発売)

Icom Inc. Co. Japan ha comunicato il 14/2/2017 che il Ricevitore a larga banda IC-R8600 da 10kHz a 3GHz con una parte in FPGA e tecnologia DSP sarà rilasciato in Giappone a fine Marzo 2017. Il prezzo consigliato è di 228,000 Yen + tasse. (dati da Japanese lang.)

Icom Co., Ltd. will release IC-R8600 a communications receiver that covers an ultra-wideband of 10 kHz to 3 GHz from the end of March 2017 in Japan – Receiver analog modes (USB / LSB, FSK, CW, AM, FM / WFM) and digital modes (DCR, D – STAR ® , NXDN ® , dPMR ® , P25) – In addition, FPGA (Field-Programmable Gate Array) + DSP method is adopted, demodulation is all processed by software. — Price in Japan 228,000 yen + tax. (! from Japanese lang).

IC-R8600 – It supports operation from PC and remote control via LAN. Moreover, by providing I/Q output terminal, it can be used for advanced radio wave analysis etc.
In terms of operability, 4.3 inch color TFT liquid crystal display to touch operation is equipped as a user interface. High-precision spectroscope and high-resolution display that draw out the power of waterfall are possible. etc (!!see the original Icom page in Japanese)

Download the Icom IC-R8600 Pre-Release Informatio in Englisch

[Note] – Detailed specifications: please see the official sources – All specifications are subject to change without notice – All trademarks belong to their respective holders.- This page is just a non-official
overview, where no one should draw any conclusions – All images and versions above is for illustration only. – (tnx)

Icom IC-7610, IC-R8600, IC-R30 and ID-51 PLUS2 models at Tokyo Ham Fair 2016

AllaTokyo Ham Fair 2016, lo scorso 20 agosto 2016, Icom Inc. Co ha annunciato 4 nuovi prodotti: il Transceiver IC-7610, il Ricevitore larga banda IC-R8600 desktop, il Ricevitore portatile IC-R30 e una nuova versione del palmare V/UHF ID-51A / E Plus2 D-STAR.

Icom-unveil-7610-veil

At Tokyo Ham Fair 2016, on 20 August 2016, Icom Inc. Co announced 4 new products: the IC-7610 Transceiver, the IC-R8600 Desktop Receiver, the IC-R30 Handheld Receiver and the ID-51A/E PLUS2 V/UHF D-STAR handheld.

IC-R8600_front2

New IC-R8600 wideband receiver covers 0.01-3000 MHz in analog and decodes multiple digital protocols, including D-STAR, NXDN, dPMR and APCO P25 – It has a large 4.3″ touch screen color display with real-time spectrum scope and waterfall. The circuit employs modern FPGA/DSP architecture with superheterodyne circuitry, Looks great!

IC-7610-med-1

The new IC-7610 HF+50 MHz 100W Transceiver is the successor to the IC-7600 – Icom had just announced the main features (that take advantage of the new Icom features introduced into the IC-7300) High definition realtime TFT color display – Touch screen interface – Direct sampling SDR platform – Dual watch – Built-In Antenna Tuner –  Connection for external display – BNC connector for Transverter, and RX IN/OUT – USB Ports and Ethernet connections.

IC-7610-indep-2

The picture (enhanced) of the front panel of the IC-7610 with two commands (MAIN & SUB) for the new Dual-Watch Icom system.

ID-51A-E_PLUS2_Ago2016-med

ID-51A/E PLUS2 – The new Terminal Mode and Access Point Modes enable you to make D-STAR calls through the Internet, even from areas where no D-STAR repeater is accessible. (…see the picture)

[Note] – Detailed specifications: please see the official sources – All specifications are subject to change without notice – All trademarks belong to their respective holders.- This page is just a non-official overview, where no one should draw any conclusions – All images and versions above is for illustration only. – (tnx)