Archivi categoria: R&S SDR

R&S®EM510 HF Receiver 9 kHz to 32 MHz – R&S®PR100 Receiver 9 kHz to 7.5 GHz

R&S_EM510_HF-receiver

R&S®EM510 HF Digital Wideband Receiver from 9 kHz to 32 MHz is a Direct Receiver, after the antenna signal has passed through Preselection with Highpass/Lowpass Filters, it is fed directly into the ADC (Analog Digital Converter) –  R&S®PR100 portable receiver  9 kHz to 7.5 GHz spectrum and spectrogram (waterfall) display on 6.5″ color screen – See the pictures, summary overview and Official Data Sheet (ENG) by link below.

R&S_EM510_front

The R&S®EM510 receiver features digital IF filters with 30 different bandwidths from 100 Hz to 10 MHz. The filter characteristics are optimized for radio-monitoring tasks, allowing top-quality processing of signals up to 10 MHz bandwidth.
Panorama scan up to 34 GHz/s or 600 000 channels/s – Frequency/memory scan up to 1500 channels/s – IF panorama with up to 9.6 MHz span – Video panorama, AM, FM, AM², FM², I/Q, I/Q² – Audio filters: notch, noise suppression, band-pass – Dual-channel analog video output (AM, FM) – LAN interface (SCPI) – and more!

R&S_EM510_rearExcellent RF characteristics and a wide dynamic range combined with powerful Digital Signal Processing are the basis for optimal system solutions.
Wideband operation: I/Q data up to 10 MHz bandwidth – Demodulation up to 10 MHz bandwidth – and more! – Demodulation modes: FM – AM – PULSE (AM PULSE)- jM – USB – LSB – ISB – CW – I/Q.

Input level: –137 dBm to +10 dBm (–30 dBμV to +117 dBμV) f = 400 kHz to 32 MHz / Frequency resolution: 1 Hz / Aliasing suppression: ≥90 dB, typ. 120 dB / 3nd Order IP: ≥30 dBm, typ. 35 dBm (low distortion mode), f = 1 MHz to 32 MHz – ≥20 dBm, typ. 25 dBm (normal mode), f = 1 MHz to 32 MHz / and more features… see the link below.

Link to: Download the R&S EM510 Data Sheet for all informations (ENG)
Link to: More information at www.rohde-schwarz.com (ENG)

R&S PR100 ReceiverThe R&S®PR100 portable receiver  9 kHz to 7.5 GHz Spectrum and spectrogram (waterfall) display on 6.5″ color screen has been specifically designed for radio-monitoring applications in the field – Display of results on a digital map loaded in the R&S®PR100 – Digitally modulated signals converted to the baseband using I/Q demodulation and stored in the receiver or exported via LAN – Full remote control via LAN interface (SCPI commands to IEEE488.2) and more.. see the link below

Link to: Download the R&S®PR100 Data Sheet #..87012 – 29 pag. (ENG)

R&S PR100_spectrumtypeFast panorama scan across the entire frequency range from 9 kHz to 7.5 GHz
10 MHz IF spectrum e demodulation with bandwidths from 150 Hz to 500 kHz
Spectrum and spectrogram (waterfall) display on 6.5″ color screen
Automatic location of emissions with direction finding (20 MHz to 6 GHz)
Whether used for monitoring emissions, detecting interference or locating miniature transmitters

[Note] Operation using standard software and PC  (The EM510 receiver comes with comprehensive operating software etc.) – All specifications are subject to change without notice – All trademarks belong to their respective holders – This page is just a non-official overview, where no one should draw any conclusions.