I0GEJ's RadioCronache.com » FT-450 http://www.radiocronache.com news, previews and reviews from ham radio world Mon, 29 Dec 2008 21:34:06 +0000 http://wordpress.org/?v=2.7 en hourly 1 FT-450 disponibile Update Software Ver. 0165 http://www.radiocronache.com/2008/06/ft-450-yaesu-update/ http://www.radiocronache.com/2008/06/ft-450-yaesu-update/#comments Tue, 17 Jun 2008 16:20:00 +0000 lidio http://www.radiocronache.com/2008/06/ft-450-yaesu-update-software-ver-0165-28052008-disponibile-la-nuova-ver-del-software-sul-sito-ufficiale-yaesu-vs/

ENG: The software version is available on the LCD display: Hold the Mode Down button; press the Power switch to turn the transceiver On (this is possible from the update ver. 0109).

28.05.2008: There is a new firmware available at Vertex Stand/Yaesu website HD024_v0165.
You will need a serial cable RS-232C, DB9F to DB9F straight cable to connect the FT-450 transceiver to your computer. If you use the USB to serial adaptor you might need to change the COM Port. It depends on your computer. Locate the program switch thru the access hole on the bottom at the front left corner of the radio. Carefully move the switch to the right (program position). See the V/S procedure information; Ver. 0165 implements improvements: Improve KEY CLICK. Also includes all previous updates.

Link to: V/S Yaesu official Update information (Download 137KB .pdf)
Link to: I0GEJ’s Ham Radio News FT-450 page

]]> http://www.radiocronache.com/2008/06/ft-450-yaesu-update/feed/ The FT-450 is a sturdy and competente purpose radio in the under $1000 class http://www.radiocronache.com/2008/02/ft-450-is-a-sturdy-and-purpose-radio/ http://www.radiocronache.com/2008/02/ft-450-is-a-sturdy-and-purpose-radio/#comments Mon, 18 Feb 2008 17:00:00 +0000 lidio http://www.radiocronache.com/2008/02/the-ft-450-is-a-sturdy-and-competente-purpose-radio-in-the-under-1000-class/
ENG: FT-450, includes a Morse code trainer. As the Op. Manual suggests: you can improve yourCW proficiency whether or not the bands are open.
The frontpanel’s DSP button stepsthrough CONTOUR, NOTCH, DNR and WIDTH settings, and these are reflected viaa graphic display.
The FT-450 does not have an automatic notch filter, but the manual notch is very effective. With the FT-450’s contour and notch capabilities, it’s possible to do some rather creative filter shaping! DNR works very well, there are n. 11 algorithm settings. IF SHIFT control lets you shift the center of the receive passband and the NOTCH, WIDTH and SHIFT functions clearly operate within the AGC loop (see the S-meeter) The WIDTH function sets the IF bandwidth, and it’s mode dependent. The DSP filters seem to work well and the bandwidth offers just three fixed settings per mode. In SSB these are 1.8, 2.4 and 3.0 kHz. On CW, the choices are 500 Hz, 1.8 kHz and 2.4 kHz. For AM, you can select 3.0, 6.0 or 9.0 kHz, and on FM, 2.5 and 5.0 kHz.

]]> http://www.radiocronache.com/2008/02/ft-450-is-a-sturdy-and-purpose-radio/feed/ Video: Yaesu FT-450 Review by VE3RFP - > Thanks for the nice video review http://www.radiocronache.com/2008/02/video-yaesu-ft-450-review-by-ve3rfp-thanks-for-the-nice-video-review/ http://www.radiocronache.com/2008/02/video-yaesu-ft-450-review-by-ve3rfp-thanks-for-the-nice-video-review/#comments Sat, 16 Feb 2008 17:44:00 +0000 lidio http://www.radiocronache.com/2008/02/video-yaesu-ft-450-review-by-ve3rfp-thanks-for-the-nice-video-review/

]]> http://www.radiocronache.com/2008/02/video-yaesu-ft-450-review-by-ve3rfp-thanks-for-the-nice-video-review/feed/ FT-450 Yaesu - Nuovo HF 50MHz 100W http://www.radiocronache.com/2007/05/ft-450-yaesu-nuovo-hf-50mhz-100w/ http://www.radiocronache.com/2007/05/ft-450-yaesu-nuovo-hf-50mhz-100w/#comments Thu, 24 May 2007 10:35:00 +0000 lidio http://www.radiocronache.com/2007/05/ft-450-yaesu-nuovo-hf-50mhz-100w/
Dopo il recente nuovo Transceiver FT-2000, la stessa Yaesu
(Vertex/Standard) introduce un nuovo apparato, con comandi
più semplici, più compatto e dotato di molte funzioni operative.
Nuovo DSP nella 2nd IF a 24kHz, con ADSP-BF531 -BlackFin,
simile a quello utilizzato da Icom nel IC-7000 (BF532 BFin).
FT-450 senza ATU e FT-450AT con ATU disponibili sul mercato
USA list 1.200$ (Prezzo scontato 990$) ed ora anche in Europa
con il prezzo che si annuncia intorno a 1.000 Euro.

Per altre info e foto vai su: http://www.gentili.org/i0gej/
]]> http://www.radiocronache.com/2007/05/ft-450-yaesu-nuovo-hf-50mhz-100w/feed/