Archivi categoria: FT1D C4FM

Yaesu FT-991 HF/50/144/430 MHz All Mode+ C4FM in a Single Compact Unit

Yaesu FT-991  HF/50/144/430 All Mode + C4FM Digital Functions in a Single Compact Unit – Touch Panel Operation Combined With Tradizional Layout and Spectrum Scope Function With Waterfall Display Capability in a 3.5 Inch full color TFT LCD display etc. (read  official leaflet and download the User Manual & the GM Istruction (ENG pdf)… see link below)

FT-991_multicontrols
FT-991 TFT LCD Display provides imformation abaut function status and settings

The FT-991 is equipped with a 3.5 inch full-color TFT display provides abaut functio status and settings including the function key display with intuitive layout makes touch operation and settings at a glance. Functions including the receiving band, the noise and signal interference reduction tool are grafically displayed.

FT-991_selct-mode-2
FT-991 Operation mode: press MODE Button & select mode with touch screen

Operating Mode: Press MODE Button to display the radio modulation form  selection scree, then touch and select your desired modulation form.

FT-991_band-select
FT-991 – Press BAN Button and select the band in one touch!

FT-991 – Press [BAND Button] and selecet the band in one touch in the display – Band Stack Operation – utilizes a triple band-stack VFO selection thet permits storing of up to three favorite ferquencies and modes onto each bamd VFO register. [Note] Only the VFO-A system has the band stacks!

FT-991-rearpanel

Final Stage with Ample Power Reserves: Push-pull arrangement of RD100HHF MOS-FET devices for HF/50 MHz range, output power 100 Watts. For the VHF & UHF bands uses the MOS-FET RD70HUF2 device which incorporates two MOS-FET in a single package, ouput of 50Watts.  – ATU autimatic tuner only for HF/50MHz bands.

C4FM_VD-mode
Digital C4FM (4-level FSK) Voice/Data Mode (V/D Mode)

Digital C4FM Mode (4-level FSK Frequency Shift Keing) for digital communication in the FT-991 can be switched betwee 1) [V/D mode] and 2) [Voice FR mode]. – 3) Not *

1) V/D Mode: for simultaneous trasmission of Voice & Data communication. Half of the bandwidth is used for voice signal with error correction.  Other Half of the data communication. (6.25+6.25 kHz = total bandwidth 12.5 kHz)
2) Voice FR Mode: for voice full rate mode, that uses  entire 12.5 kHz bandwidth to trasmit only digital voice data, with high sound quality.

[Note] 3)* [Data FR mode] high-speed data communication mode, that uses entire 12.5 kHz bandwidth for only data is not supported in this device. (…see Yaesu leaflet info)

Link to: Yaesu FT-991 Information Brochure (5.19 MB) EN
Link to: Download User and GM group Instruction Manuals 

WIRES-X the Yaesu Internet Linking (VoIP wireles HRI-200 Modem is necessary) for Digital Node Station / Internet LAN

Wires-X-diagram
Yaesu WIRES-X diagram for VoIP Communication

WIRES (Wide-coverage Internet Repeater Enhancement System) is an Internet communication system,  an amateur node station, with HRI-200,  connecting to the Internet is used as the access point and connects the wireless communication to the Internet.
Link to:  Wires-X spec & Info by Yaesu USA webpage (ENG)

[Nota] – Specifiche dettagliate: si prega di vedere le fonti ufficiali – Tutte le specifiche sono soggette a modifiche senza preavviso – Tutti i marchi appartengono ai rispettivi holders.- Questa pagina è solo una panoramica non ufficiale, dove nessuno dovrebbe trarre conclusioni – Tutti le immagini e le versioni di cui sopra è solo per illustrazione.

Yaesu FT2DR C4FM/FM 144/430 MHz Dual Band Digital Transceiver

FT2DR – Yaesu Introducing a New Digital Portable C4FM – FM 144/430 MHz Dual Band Transceiver – Easy operation with large touch panel display – Builtin High Sensitivity 66 ch GPSS – Dual watch & Dual Monitor – Shipping early 2015!

FT2D_FT1D-display
Yaesu FT2DR with large touch panel display (coming soon)

FT2DR System Fusion compatible – FM digiatal operation with AMS (Automatic Mode Select) – New 1.7-inch high resolution touch screen display – 700 mW Loud and Clear voice technology –  Modulation F1D F2D F3E F7W – 5W @ 7.4V – Weight 310 g  – Receiver frequency range = A (Main) Band 1.8 – 30MHz / 76 – 108 MHz / 137 – 174 NHz / 222 – 420 MHz (GEN1) / 470 – 774 MHz (UHF) – B (Sub) Band idem A)  not SW Band & FM Broadcast.

FT2D-front
New Yaesu FT2DR Digital & Analog VHF UHF (coming soon)

FT2DR include: a built-in High Sensitivity 66 ch GPS with antenna – 1200 bps/9600 bps APRS® function – Dual watch (V/V U/U/ V/U) – Dual Monitor (C4FM Digital / C4FM Digital) – GPS Logging / Recording capabilities – Water resistant (IPX5 Rating) & microSD Card Slot. Read the official web-page for complete information

Link to: Yaesu Usa VHF/UHF Handhelds web-page (ENG)

[Note] – Detailed specifications: please see the official sources – All specifications are subject to change without notice – All trademarks belong to their respective holders.- This page is just a non-official overview, where no one should draw any conclusions – All images and versions above is for illustration only. (tnx)

HAM RADIO 2013: FDM-DUO – HandyPSK – EXPERT 1.3K – Exacalibur ULTRA – K3/0 Mini – FT1DR C4FM – PT-8000 & More

HamRadio-2013

Ham Radio 2013 – The International Exhibition for Radio Amateurs, HAM RADIO 2013, was held June 28-30, 2013 in Friedrichshafen, with exciting new models and products! – Here are  some photos and news  from the tour…! – FT-1DR FDMA Mode like NEXEDGE™ Kenwood’s or IDAS™  Icom’s Digital PMR’s Radios. See the new FT1-DR brochure –   Fiera di Friedericshafan 2013: un report con varie foto e descrizione di alcune novità  – See more & Link below!

FDM-DUO a new SDR rtx made in Italy – ELAD has displayed his “little SDR Tranceiver” at Ham Radio Friedrichshafen 2013. Quite interesting concept to have a stand alone QRP rig at 192kHz sampling, combined with an extended SDR if you use it with a Computer.

FDM-DUO_front-rear-max

It is a Direct Sampling SDR receviver (is an RF Sampler) with a DDC on a FPGA, and a Cortex ARM DSP module for filtering and demodulation in stand-alone mode. In RX and TX directions it is a fully SDR technology. QRP trasmitter 5 W Output Power – CAT Control via USB-2 port dedicated.  (please click image to enlarge)

FDM-DUO_rtx-Elad-2013In other words: you can take it with you as a self-sustained 192kHz SDR narrow band modes QRP tranceiver (Sideband/CW/AM). –
At home, attached to a faster CPU (computer with FDM-SW1 software o so), you can run it at its full bandwidth of 6144kHz sample rate and use wider bandwidth RX/TX modes, inc. DSB, AM Sync, FM, RTTY, DRM, WB FM+RDS.
Link to: Download the FDM-DUO lefleat-1 by ELAD Srl –

FDM-DUO Coming Soon – ! A meno che non costerà meno di 800 Euro/1100$, più le spese di spedizione, per ora preferirei ottenere un consolidato QRP Elecraft KX3 ( L’Italia dell’eccellenza nel Software Defined Radio va apprezzata per i successi di alto livello avuti, ma qui … ben tre porte USB-2 sul retro del DUO (1RX-1TX e 1CAT), impone di capirne il perché e gli sviluppi del prototipo)!  … il team Elad ci sorprenderà!

HandyPSK – Compact PSK 40m & 20m QRP Transceiver

You can operate CW, RTTY, BPSK, QPSK without a PC. Just connect the battery and antenna and you can operate anywhere, anytime with 100mW pover output. –  PS2 External keyboard jack – Stand-alone no PC!
Picture Main PCB: You can see DsPIC33F DSP, TI 3204 CODEC, 3 pole Crystal filter.

HandyPSK-combi

SilentSystem Ltd specification: Front-end crystal filter architecture – Low noise and high IMD dynamic range – Internal DSP emphasizes weak signals and decodes the text – Rotary dial operation. Copy received words and paste to send templates – 128 x 64 dot backlit graphic LCD display – 100mW RF output, and more.

SPE  EXPERT 1.3K-FA Linear Amplifier Up to 1.5 KW (1.3 KW typ.)

Expert_1-3K-ampli

The Italian “SPE” introducing its new EXPERT 1.3K-FA Amplifier – Powerful up to 1.5kW – Very Ligth: 7,5 kg – 3 Power levels: (max) full, (mid) 800W, (low) 500W – Builtin Switching Power Supply with PFC – Frequency Range 1.8MHz to 50 MHz – Manages 4 antenna automatically – Fully remotable & CAT –  USB & RS232 ports – Builti two fast CPUs – [note] The PA-Unit (Power Amplifier) uses only one new rugged device! – Available also without ATU (allowing significant… savings) – Pricing will be $5200 USD – Availability about the late 2013. – (please see the official source!)

WiNRADiO introducing its new SDR EXCALIBUR “Ultra” (beta version)

SDR_Excalibur-ultra_combi-2013WiNRADiO SDR Excalibur Series employs a user-selectable preselector that can operate either in a fully automatic or user-configurable mode. As many as 119 different filter combinations can be constructed by the user (91 bandpass, 14 low-pass and 14 high-pass). The front-end employs 34 subminiature electromechanical relays (rather than often used but distortion-prone semiconductor switches.

Elecraft K3/Ø Mini Remote Controll head “Real Rig Feel”

K3-0mini_2013Elecraft and its new K3/Ø Mini for remote controll of a home or contest station!! – the lightweight portable remote control for the K3 Transceiver –  “Real Rig Feel” remote operation for CW, SSB, & Data modes – Stereo! Amplified Internal Speakers – Single cable inteface to the Remote Rig Internet System (RRC-1258MkII Mod. or so) – Pricing will be $695.00 USD – Availability is expected for early August 2013.

Yaesu and its “D-Star” DV competitor FT-1DR & the HF FTdx-1200

FT-1DR V/U HT the Yaesu C4FM DV competitor 144/430 FDMA and FM modes. Tthe new HT digital was not compatible with a D-STAR DV standard, and the repeaters available for it only some areas recently.

FT1DR_C4FM&FM FT1DR_4-modes Yaesu_FTdx-1200

Digiata C4FM FDMA & Analog FM, in 4 communication modes: 1) V/D Mode: Simultaneous Voice/Data Mode (6.25kHz voice + 6.25kHz data & ec code, bandwidth is used) – 2) Voice FR Mode: Voice Full Rate Mode (uses the entire 12.5kHz for digital voice 3) Data FR Mode: High-speed 9.6 kbps  Data Communication Mode (uses the entir 12.5kHz…..)4) Analog FM Mode – AMS (Automatic Mode Select) is available.

FT-1D news: The built-in worldwide standard AX.25 Data TNC Modem permits uncomplicated APRS® FT1D_FM-aprs(Automatic Packet Reporting System) operation.- More useful information & GPS logger is stored on the high capacity micro SD card (Maximum 32GB) – Rx covers 504 kHz – 999.900 MHz (A Band), 108 MHz – 580 MHz (B Band), continuous reception for Short-wave, FM/AM broadcasts, and more features… see the new brochure link below!

List Price: $600,00 Your Price: $539,95 USD (Universal Radio) !!

[Note] !!! The FDMA C4FM (4-Level FSK) is a Frequency Division Multiple Access (FDMA) methodology whereby one user accesses a channel frequency at any one point in time. (i.e. accesses via the frequency domain)… …!
like NEXEDGE™ Kenwood’s Digital PMR or IDAS™  Icom’s Digital PMR radios! – (2005/2007: Forms a technical alliance with Kenwood, Icom, Zetron Inc & CTE International etc.  to jointly research to dPMR digital two-way radios – narrow 12.5 kHz and very narrow 6.25 kHz bandwidth channels )

Link to: Download the FT1-DR/FT1-DE latest Brochure B9200643 (ENG)

[Note]  dPMR is a digital technology designed for VHF/UHF that uses 4-Level FSK FDMA (C4FM) modulation and supports both voice and data. – The dPRM Association support the latest digital PMR radio technology known as dPMR. The group currently includes radio manufacturers, chip manufacturers, protocol and software developers and systems developers. (!! Yaesu Musen Co.  not member at this time !)

Link to: More news & Members from the © dPMR Association web site 

Hilberling GmbH PT-8000A VLF / HF / VHF Transceiver (Rev.2.0)

Hilberling-200W-PA  PT-8000ABlock Schematic PT-8000A

RX: 9 kHz – 30 MHz/50 – 54 MHz/69.9 – 70.5 MHz/144 – 148 MHz/110 – 143.9 MHz
TX: 160/80/60/40/30/20/17/15/12/10/6/4/2m-band – All-Mode  – 2x RX – DSP and 16-pol analog + digital filters – Frequency Stability 0.005 ppm – List Price: €.13.290,00 incl. 19% MwSt (VAT De).
Link to: Download the Hilberling PT-8000A PDF Brochure

A-meeting_2013 OE9XGV_Steyr-680 Icom_IC-7700_2013

[Note] – Detailed specifications: please see the official sources – All specifications are subject to change without notice – All trademarks belong to their respective holders

FTdx-3000 Menu very easy – VFO B/A now A/B! – FCC ID ok – FT1D and FTM-400D

FTdx-3000 Settings MENU now scrolling on display and set values! an innovative approach (now… like Icom inc.) – FTDX3000 approved by F.C.C.  ID K6620461X50 – New FT-1D V/U HT FCC ID K6620445X20 and FTM-400D V/U Mobile for digital  C4FM FDMA mode. – See the update pictures of a built-in 4.3-in TFT Display and other news and Link below.

List Price: $3500.00 Your Price: $2799.95  now 2699.95 (Universal Radio US market )

  

FTdx-3000 Utilizes a new innovative and easy menu settings system and a new 4.3-inch wide color LCD displays the operating information and the status of the transceiver functions selected. (now… like Icom inc.)

To enter into SET MENU mode, simply press the [MENU] button and turn the [CLAR/VFO-B] knob to scroll Up or Down your desired Menu number displayed on the Main LCD and access to many settings and speeds up the operation.

The layout settings [MENU-1] are very fine and offer a nice array of features for the operator. The directional arrows (keypad) and [SELECT] button help you with quick and intuitive access to settings. (please click the picture to enlarg) –

These systems have been newly developed by Yaesu Musen Co., LTD with new substantial design changes, compared to previous devices under the Vertex Standard Inc. Brand! – I have to commend Yaesu Musen Co. for coming up with such an innovative and easy approach.

In Dayton and Friedrichshafen Expo as you can see the buttons [VFO B/A] are reversed! than usual [VFO A/B] – Now in Tokyo Ham Fair these buttons to select the two VFO have been reported in the usual position: [VFO A/B]

The Main operating frequency is the most important in the radio display, with [VFO-A] frequency located just above the Main dial. The [VFO-B] frequency can be displayed on the 4.3-inch color LCD display (left). – For the [MODE] change (USB LSB CW  RTTY etc.) you have a single button with sequential selection or via Memory channels!
Link to: Download the FTDX-3000 Preliminary Brochure link a ML&S UK 

FTdx-3000 Receiver is double conversion, with the first IF at 9 MHz and the second DSP IF at 30 kHz for SSB and CW and 24 kHz for AM and FM modes (like FTdx-5000’s) but the 1st mixer is different from the 1st mix used in the 5000′ series (8x3SK294 !) (see the picture)

Independent Frequency display although the FTDX-3000 has only one receiver; the rig uses dual VFOs, essential for split operation. General coverage receive is available from 30 kHz to 56 MHz.

On the rear panel Signal are furnished: Output for an external receiver and the 9 MHz IF output and two connectors for optional u-tune unit … etc. (see picture)

The July, August and September  QST’s Cover II inserts the manufacturer’s specifications: !! 4.3-inch Large color LCD display / DR:106 dB / IP3 +33 dBm  / 14MHz Band CW (500) (IPO ON, Roofing Filter 600Hz, 2 kHzSpacing) –

Link: Video Ham Fair Tokyo 2012 YAESU Booth 【ハムフェア2012 ヤエスブース】

FT-1D 144+430 MHz HT coming-soon. – This device has been approved by the F.C.C. (FCC ID K6620445X20) !

The-FT1DR/E VHF/UHF HT provides both analog and digital communications on both bands with up to 5 watts.
It is possible to switch between analog and digital mode by pressing one button on the radio. – The FT-1D uses the C4FM FDMA for a lower BER (bit error rate) like the professional LMR (Land Mobile Radio) radios. – The FT-1D can obtain a data trasfer speed 9.6 kbps and E-GPS function for Digital ARTS (Auto-Range Trasponding System) and more.
[Note] The Digital C4FM FDMA mode is not compatible with the Digital GSMK D-STAR

Link to: FT-1D Brochure (pag. 1-2) Radioworld  http://blog.radioworld.ca/?p=2941

………………………………………………………………………………………..
FTM-400D VHF/UHF Mobile (first prototype) AM/FM/NFM/DV (C4FM FDMA, 9.6 Kbps)

Feature (preliminary): Large color touch screen. GPS/APRS functions. Packet 1200/9600bd ready.
Spectrum scope. ARTS. Bluetooth. Twin RX – Micro SD card slot.

[NoteAll marks are property of their respective owners. – Specifications are subject to change without notice!