Archivi tag: ADC

Icom IC-7610, IC-R8600, IC-R30 and ID-51 PLUS2 models at Tokyo Ham Fair 2016

AllaTokyo Ham Fair 2016, lo scorso 20 agosto 2016, Icom Inc. Co ha annunciato 4 nuovi prodotti: il Transceiver IC-7610, il Ricevitore larga banda IC-R8600 desktop, il Ricevitore portatile IC-R30 e una nuova versione del palmare V/UHF ID-51A / E Plus2 D-STAR.

Icom-unveil-7610-veil

At Tokyo Ham Fair 2016, on 20 August 2016, Icom Inc. Co announced 4 new products: the IC-7610 Transceiver, the IC-R8600 Desktop Receiver, the IC-R30 Handheld Receiver and the ID-51A/E PLUS2 V/UHF D-STAR handheld.

IC-R8600_front2

New IC-R8600 wideband receiver covers 0.01-3000 MHz in analog and decodes multiple digital protocols, including D-STAR, NXDN, dPMR and APCO P25 – It has a large 4.3″ touch screen color display with real-time spectrum scope and waterfall. The circuit employs modern FPGA/DSP architecture with superheterodyne circuitry, Looks great!

IC-7610-med-1

The new IC-7610 HF+50 MHz 100W Transceiver is the successor to the IC-7600 – Icom had just announced the main features (that take advantage of the new Icom features introduced into the IC-7300) High definition realtime TFT color display – Touch screen interface – Direct sampling SDR platform – Dual watch – Built-In Antenna Tuner –  Connection for external display – BNC connector for Transverter, and RX IN/OUT – USB Ports and Ethernet connections.

IC-7610-indep-2

The picture (enhanced) of the front panel of the IC-7610 with two commands (MAIN & SUB) for the new Dual-Watch Icom system.

ID-51A-E_PLUS2_Ago2016-med

ID-51A/E PLUS2 – The new Terminal Mode and Access Point Modes enable you to make D-STAR calls through the Internet, even from areas where no D-STAR repeater is accessible. (…see the picture)

[Note] – Detailed specifications: please see the official sources – All specifications are subject to change without notice – All trademarks belong to their respective holders.- This page is just a non-official overview, where no one should draw any conclusions – All images and versions above is for illustration only. – (tnx)

SunSDR-MB1 A SDR Stand alone – ANAN-100 & 200D Tests Report Updated 2014 by VA7OJ

SunSDR-MB1_sdr-rtx

SunSDR-MB1 HF/6m/VHF Transceiver a new Stand-alone Made in Russia by Expert Electronics LLC – The SDR Transceiver based on DDC/DUC (Direct Conversion technologies) MB1 new Stand-alone SDR…see link – The ANAN-100D SDR & ANAN-200D HF/6m DDC/DUC Transceivers Made in India  by Apache Labs – Download the latest Tests Report & Review Iss. 5 2014  by Adam, VA7OJ/AB4OJ.  See update news and links below!

Expert Electronics SunSDR-MB1 Stand Alone Software Defined Radio (Preliminary 2013) – For last news and update model Ver. 2 MB1  see the link 2014 (20/06/2014 ) below: http://www.radiocronache.com/2014/06/sunsdr-mb1-v-2-sdr-transceiver/

Others Previous Features (by SunSDR Forum 08/06/2013):

SunSDR-MB1_ext-display Flex-6700_Display-2013

Direct Conversion ADC sample rate: 160MHz, ADC resolution: 16 bit SFDR receiver: 78-82 dB – DUC sample rate: 360MHz, DUC resolution: 14 bit High perfomance 24 bit Audio Codec on board – Connect to PC: LAN/WLAN (Ethernet/WiFi 802.11 g/n) – Trasmitter Output power, nominal: 125W (HF), 30W (VHF) – IMD3 DR of transmitter: about 30-40 dB – Very small CW delay: 10ms – Size: 370x160x270mm, Weight: 10 Kg.

SunSDR-MB1_rear

SunSDR-MB1 Rear Panel Inputs/outputs: Two VHF (SO239)- Two HF (SO239)- Wide RF input port direct connect to high speed ADC (SMA) & DUC (SMA) for XVTRX, measurement etc.-

Software: ExpertSDR2 (all updates)  is free. – SunSDR-MB1 is available for order.

ExpertSDR2-software

Program ExpertSDR is developed by the company Expert Electronics to support the SunSDR-transceiver – (Bасилий, Vasily writes: User can push one button (20 sec start time/ 5 sec finish time) and can works in radio air without keyboard and mouse.. etc.) – Link to: Expert Electronics LLC Home-page

ANAN-100D/E SDR  Made in India Tests Report by VA7OJ (Issue 5 Aug. 2014 including ANAN-200D (!! see link below!)

ANAN-100D_fron-rear-09-2013

Apache Labs Specifications: (summarized) ANAN-100D & E All Mode Receiver SDR Direct Down Conversion type –

FPGA_Altera_CycloneIV

Frequency Coverage 10kHz – 55MHz – Dynamic Range 125dBm – Noise Floor (500Hz Bandwidth @ 14.2Mhz) -140 dBm – FPGA type EP4CE115  – On board DSP processing Extensive, including optiona Sof Core processing – Master Clock 122.88MHz  and phase noise @ 10kHz -149dBc.

Apache Labs has announced: Apache Labs and OM Hermann, DL3HVH are pleased to announce a strategic tie up for the development of cuSDR software for the ANAN series transceivers, cuSDR is a state-of-the-art SDR platform and has key advantages such as capability to simultaneously display multiple receivers with Panadapter and waterfall displays!

ANAN-100D_2_TXunit

All Mode Trasmitter SDR Direct Up Conversion type – RF Output 1-100W – Coverange 160-6M – Modulation Digital Low Level – Carrier & Unwanted Sideband Greater than -90dBc – Harmonic 50dB (HF) 60dB (VHF) – 2xRD100HHF1 Mosfet 100W (160-6m).

News by Apache Labs Support: “We are pleased to announce that the ANAN series HF & 6M SDR transceivers including the ANAN-10, ANAN-100D and the ANAN-200D are now CE and RTTE certified as per EU trade directives”.

ANAN-100D & ANAN-200D Tests Report – Iss. 5, August 5, 2014  by Adam, VA7OJ:  Supersedes all previous issue! 

This is a revised test report, presenting results of an RF lab test suite performed on an Apache Labs ANAN-100D direct-sampling/DUC SDR transceiver loaned by Apache Labs. Appendix I presents selected tests conducted on an ANAN- 200D. – As a result, several receiver parameters were re-tested. – The Issue 5 incorporates the results of these re-tests (denoted by “R”).

pdf_logoLink to: The ANAN-100D & 200DTests Report (5) VA7OJ
 Link to: Apache Labs Private Limited (Apache Labs) page

[Note] All specifications are subject to change without notice – All trademarks belong to their respective holders. – This page is just a non-official overview, where no one should draw any conclusions – all images and versions above is for illustration only.

R&S®EM510 HF Receiver 9 kHz to 32 MHz – R&S®PR100 Receiver 9 kHz to 7.5 GHz

R&S_EM510_HF-receiver

R&S®EM510 HF Digital Wideband Receiver from 9 kHz to 32 MHz is a Direct Receiver, after the antenna signal has passed through Preselection with Highpass/Lowpass Filters, it is fed directly into the ADC (Analog Digital Converter) –  R&S®PR100 portable receiver  9 kHz to 7.5 GHz spectrum and spectrogram (waterfall) display on 6.5″ color screen – See the pictures, summary overview and Official Data Sheet (ENG) by link below.

R&S_EM510_front

The R&S®EM510 receiver features digital IF filters with 30 different bandwidths from 100 Hz to 10 MHz. The filter characteristics are optimized for radio-monitoring tasks, allowing top-quality processing of signals up to 10 MHz bandwidth.
Panorama scan up to 34 GHz/s or 600 000 channels/s – Frequency/memory scan up to 1500 channels/s – IF panorama with up to 9.6 MHz span – Video panorama, AM, FM, AM², FM², I/Q, I/Q² – Audio filters: notch, noise suppression, band-pass – Dual-channel analog video output (AM, FM) – LAN interface (SCPI) – and more!

R&S_EM510_rearExcellent RF characteristics and a wide dynamic range combined with powerful Digital Signal Processing are the basis for optimal system solutions.
Wideband operation: I/Q data up to 10 MHz bandwidth – Demodulation up to 10 MHz bandwidth – and more! – Demodulation modes: FM – AM – PULSE (AM PULSE)- jM – USB – LSB – ISB – CW – I/Q.

Input level: –137 dBm to +10 dBm (–30 dBμV to +117 dBμV) f = 400 kHz to 32 MHz / Frequency resolution: 1 Hz / Aliasing suppression: ≥90 dB, typ. 120 dB / 3nd Order IP: ≥30 dBm, typ. 35 dBm (low distortion mode), f = 1 MHz to 32 MHz – ≥20 dBm, typ. 25 dBm (normal mode), f = 1 MHz to 32 MHz / and more features… see the link below.

Link to: Download the R&S EM510 Data Sheet for all informations (ENG)
Link to: More information at www.rohde-schwarz.com (ENG)

R&S PR100 ReceiverThe R&S®PR100 portable receiver  9 kHz to 7.5 GHz Spectrum and spectrogram (waterfall) display on 6.5″ color screen has been specifically designed for radio-monitoring applications in the field – Display of results on a digital map loaded in the R&S®PR100 – Digitally modulated signals converted to the baseband using I/Q demodulation and stored in the receiver or exported via LAN – Full remote control via LAN interface (SCPI commands to IEEE488.2) and more.. see the link below

Link to: Download the R&S®PR100 Data Sheet #..87012 – 29 pag. (ENG)

R&S PR100_spectrumtypeFast panorama scan across the entire frequency range from 9 kHz to 7.5 GHz
10 MHz IF spectrum e demodulation with bandwidths from 150 Hz to 500 kHz
Spectrum and spectrogram (waterfall) display on 6.5″ color screen
Automatic location of emissions with direction finding (20 MHz to 6 GHz)
Whether used for monitoring emissions, detecting interference or locating miniature transmitters

[Note] Operation using standard software and PC  (The EM510 receiver comes with comprehensive operating software etc.) – All specifications are subject to change without notice – All trademarks belong to their respective holders – This page is just a non-official overview, where no one should draw any conclusions.