
Ham Radio in Friederichshafen: la Esposizione Internazionale per Radioamatori più importante d’Europa si è svolta, a fine Giugno 2008, alla Messe Friederichshafen in Germania con l’HAMtronic; Oltre 17.000 visitatori 180 Espositori e Società del settore da oltre 30 paesi per questo grande incontro internazionale.
Link to: Photo-Gallery Hamradio Expo, Vedi il Rapporto fotografico dalla Fiera
ENG: HAM RADIO in Friedrichshafen: the InternationalAmateur radio Exhibition with HAMtronic; Over 17,100 visitors, 180 exhibitors and societies from over 30 countries were represented at this year’s big-show.

Switch BOX della Elad: è una unità di commutazione dei collegamenti d’antenna tra un RTX ed un ricevitore SDR separati. Distribuita da WoodBoxRadio di IK3VIG, Beppe, è dotata di sensore di RF trasmessa (100W max) che permette l’uso di un Ricevitore SDR come il PERSEUS, unitamente ad un qualsiasi Transceiver HF in modo automatico tramite un relay interno, che mette a massa l’antenna RX durante la trasmissione. L’unità Switch BOX, consente di gestisce anche i segnali audio provenienti dal ricevitore o dal monitor del trasmettitore, permettendo un rapido ed agevole confronto di ascolto tra i due segnali così ricevuti. Usando la CAT dell’RTX, con una partizione di software sul PC per la funzione di sincronismo trà l’RTX e il Perseus, si ottiene un nuovo e performante transceiver. Protezione: Switch BOX è dotato di uno scaricatore a gas che si inserisce sull’ imput di antenna.
Link to: Download the Connection diagram .pdf
ENG: SWITCH BOX by Elad, is a automatic T/R switch senses transmitted RF (100W max) and switches your
antenna from SDR receive (PERSEUS) to transmit using a relay. It shorts your receiver antenna input to ground to protect your SDR (Official distribution by WoodBoxRadio, IK3VIG, Beppe). Instead of using RF sense to switch the antenna, a control line input lets your key/keyer or PTT line switch the antenna. A complete switch control is available for the audio path of receiver and transceiver. Using CAT of your RTX, with third parts software which provide a SYNC function between RTX and your Peseus SDR, you can make an outstanding and high performance transceiving operations. Protection: The SWITCH BOX provides gas discharge protection on the antenna input.
Ritornano i Kit per assemblare apparati radio come ai vecchi tempi. La Marconi Japan Co, Ltd ha presentato alla Expo di Dayton Hamvention 2008 un Ricevitore HF RX-1 e un Trasmettitore HF in Cw TX-1, realizzati anche con pannelli di vario colore: Bianco, Grigio, Rosa! Saranno disponibili in Kit con soluzioni tecniche di preparazione che renderanno facile il montaggio, per divertirsi ad autocostruirli.
Link: Official Site Marconi Japan Co Ltd
Link: Dayton Hamvention Expo Galleries images
ENG: HF Receiver ”Marconi RX1“ and HF CW Transmitter “Marconi TX1“ will be exhibited in Dayton Hamvention on May 16-18, 2008; the MARCONI company, have developed and finally brought up a unit in a style of “KIT FORM” in order to solve all these troblesome: Ready-made necessary holes provided in the casing; Panel pre-imprinted; Provided with dial structute; Provided with all parts necessary. This KIT unit from MARCONI is highly recommended to let you fully enjoy for fabrication of your own radio.All what is needed to be done is to work on the pattern of your circuitry and assemble. As the case itself is design with enough spacing, new features can be added at each time its need arises. And, as the circuitry can be changed and improved the way it is wanted,there is a grand pride of being a ownerships of a unit that nobody-else has the same of its kind in the world.

New Icom IC-7200, rugged manpack styling
Like: Front speaker, rear bumper to protect connectors, 0.5ppm stability, reasonable receiver features, Icom’s known IF-DSP architecture, MB-116 handles, built.in 50MHz, rugged manpack styling , 201 memory channels, still using the CI-V interface and audio R/T via USB would be fine for digital modes.
Dislikes: No FM for 10 or 6 meters! (WHAT!) Only one antenna port, only one setting on attenuator, (10 and 20db would be better).
Link to Download the bochure and interior views! IC-7200
Positivo : Altoparlante anteriore, Bordi sul lato posteriore per proteggere i connet-tori, 0.5 ppm di stabilità, Ottime caratteristiche del ricevitore, IF-DSP nella 3th IFa 15.625kHz, MB-116 maniglie rach, comprende i 50MHz, di stile tipo militare, 201 canali di memoria. Mantiene lo standard CI-V per l’interfaccia che qui utilizza anche la porta USB che comprende l’audio modulato o ricevuto molto utile per la gestione delle comunicazioni digitali.
Negativo: Non ha il modo FM utile invece per 10 o per i 6 metri! (peccato!) Ha un unico connettore di antenna e l’attenuatore ha una solo impostazione ( più utile due passi da10 e 20dB)

Switch BOX: la prossima disponibilità dell’unità di commutazione esterna del collegamento d’antenna tra il ricevitore SDR ed un RTX separato renderà possibile usare Perseus in modo atuomatico e trasmettere con il proprio RTX analogico e ricevere con il digitale, usufruendo di tutte le relative funzioni di filtraggio e di visione panoramica dello spettro. La sintonia sincronizzata di entrambi gli apparati, come sopra, potrà essere comandata sia con la “manopola” del Main Tuning del Transceiver sia dal software del Perseus.
Link to: Switch BOX Automatic Antenna Switch
Link to: SDR-IQ, Perseus, QS1R Measurements by IK1ODO, (.PDF)
His tests cover the sensitivity, dynamic range, 3rd order IMD along with searching for aliasing spurious responses etc.

ENG: Russian Antartic Expedition did start last March 13th leavin from South Africa, on board of Academician Fedorov on a route to Antartica. Call sign used will be R1ANT for ham radio expedition for visiting more Antartic bases. QSL manager is Valey, RW3GW leading of activity
Link to WAP, Worldwide Antartic Program

Sulla rivista della ARRL, QST di aprile 2008 è riportata la Review del Transceiver HF 50MHz della Elecraft Mod. K3, con risultati impressionanti per l’alta qualità delle misure Two-Tone IMD Testing, IP3, Blocking gain compression: 20/5/2 offset: 139/139/139 dB! and Reciprocal Mixing (500HzBW) 20/5/2 offset: -116/-106/-95 dBc. Testing QST open version with permission from ARRL
Link to: Download the ARRL QST Elecraft K3 Review (.pdf)
ENG: The Elecraft Mod. K3 is all modes SSB, CW, Data, AM, FM 100W (or 10W upgradeable) models, 32-Bit floating point IF DSP, High performance DDS/PLL synthesizer with TCXO, Built-in PSK RTTY decode/encode allows data mode operation with or without a PC and more;
Link to: Legislazione italiana, Italians Laws Radioamateur.eu
Link to: Reciprocità radio, Worldwide Information OH2MCN
Link to: La prima Radio, Fondazione G. Marconi
